Slitting Machine For Assisting Warp Knitting Machine To Weave Shading Net And Vegetable Bag
Slitting Extension M/C
This slitting extension machine is located in front and rear of a film slitting extension machine, which is used to slit a HDPE film and extend, then yarns are fed directly to the film slitting extension Machine.
The machine consists mainly of:
Sheet width: 1,200mm.
Opening rollers.
Fixed flat knives with adjustable spacing ring to give strip width of 4.0 - 6.0 mm.
Transport rollers driven by 2 steps change drive.
Winding beam devices of the selvedge yarn.
Main drive: 2 sets machine attached one unit 1.5 kw motor.
Heater: each set machine attached 5 kw.
Main components of the machine
|
|
Frame part
|
The frame is composed of left and right main panels, hot bed support beams, unwinding supports, etc., with stable structure. It can be placed with a maximum coil diameter of 800mm
|
Transmission roller
|
The slitting and stretching of the film are mainly realized by three groups of rollers at different speeds through knife rest, pull roller group, hot plate and pull roller group.
|
Tension buffer device
|
The tension buffer device is composed of a roller, a bracket, a counterweight, etc.
|
Cutting device
|
The film is cut into suitable width by the slitting device
|
